34
Deleting a Pattern
1. Press.the.[PATTERN.SELECT].button.so.the.button.
is.lit.
The display will indicate “Ptn” and the pads that have
been recorded will blink.
2. Press.the.[DEL].button.so.the.button.is.lit.
The display will indicate “dEL.”
If the display indicates “ENP,” that bank does not contain
any pads to which a pattern is assigned.
3. Press.a.bank.button.and.a.pad.to.specify.the.bank.
and.pad.of.the.pattern.you.want.to.delete.
The selected pad will light, and the [DEL] button will blink.
MEMO
• Nothing will happen if you press a pad to which no
pattern is assigned (i.e., a pad that is not lit).
• You can simultaneously select more than one pad if
they are in the same bank.
• If you specify a bank that’s protected (p. 38), the display
will indicate “Prt” (Protected) and you won’t be able
to delete a pattern.
• If you decide not to delete a pattern, press the
[CANCEL] button.
4. Press.the.[DEL].button.to.carry.out.the.deletion.
During this process, the [DEL] button will change from
blinking to lit, and the dot in the display will blink. When
the dot stops blinking, deletion has been completed.
NOTE
Never turn o the power while the dot is blinking.
Doing so may destroy the SD card.
Deleting All Patterns
Here’s how to delete the patterns of all banks in a single
operation.
1. Press.the.[PATTERN.SELECT].button.so.the.button.
is.lit.
The display will indicate “Ptn,” and pads that are recorded
will blink.
2. While.holding.down.the.[CANCEL].button,.press.
the.[DEL].button.
The display will indicate “dAL,” and the [DEL] button will
light. The [BANK] buttons will blink.
3. Press.one.of.the.[BANK].buttons.
MEMO
• If protection is in eect (p. 38), “Prt” (Protected) will
be displayed, and you won’t be able to carry out the
deletion.
• If you decide not to delete the patterns, press the
[CANCEL] button.
4. Press.the.[DEL].button.to.carry.out.the.deletion.
During this process, the [DEL] button will change from
blinking to lit, and the dot in the display will blink. When
the dot stops blinking, the deletion has been completed.
NOTE
Never turn o the power while the dot is blinking.
Doing so may destroy the SD card.
Exchanging the Patterns of Two Pads
By exchanging patterns between two pads, you can
change the way in which patterns are assigned to the
pads.
MEMO
If you decide to cancel this operation during the
procedure, press the [CANCEL] button.
1. Press.the.[PATTERN.SELECT].button.so.the.button.
is.lit.
The display will indicate “Ptn.”
2. Exchange.the.patterns,.using.the.procedure.
described.in.“Exchanging.Samples.between.Two.
Pads”.(p..31).
In the procedure, read “pattern” wherever the explanation
says “sample.”
Copying a Pattern to Another Pad
You can copy a pattern from one pad to another pad. This
lets you create a new pattern based on an existing pattern.
MEMO
If you decide to cancel this operation during the
procedure, press the [CANCEL] button.
1. Press.the.[PATTERN.SELECT].button.so.the.button.
is.lit.
The display will indicate “Ptn.”
2. Copy.the.patterns,.using.the.procedure.described.
in.“Copying.a.Sample.to.Another.Pad”.(p..31).
In the procedure, read “pattern” wherever the explanation
says “sample.”