How to Edit Sound Parameters
It is not possible to simultaneously edit the sound parameters of pad banks A and B. Use [BANK A/B]
to switch between the two pad banks, and edit each bank separately.
Editing a sound parameter
1In the Play mode, use the PATCH/VALUE [-] or [+] buttons to select
the Patch (1–99) to edit.
2Press [EDIT] to enter the Edit mode.
Selecting and changing parameters is called editing.
3Strike the pad you wish to edit.
4Turn Layer on or off if necessary.
You can have only one of the Pad Bank Instruments sound by setting Layer to OFF.
5Press [BANK A/B] to select the bank you wish to edit.
The selected PAD BANK indicator will be flashing.
6Press [SELECT] to select the SOUND parameter group.
fig.26
7Press [ ] or [ ] to select the parameter to be edited.
8Use PATCH/VALUE [-] or [+] to set the value.
For a numerical parameter, pressing PATCH/VALUE [-] will decrease the value, and
pressing PATCH/VALUE [+] will increase the value.
Pressing PATCH/VALUE [+] while holding down PATCH/VALUE [-] (or vice versa) makes this
change more rapidly. However, when selecting a Parameter Group Instrument (INST), when you
press PATCH/VALUE [+] while holding down PATCH/VALUE [-] (or vice versa), you jump to the
next Instrument group.
MEMO
MEMO
INST
LEVEL
PITCH
DECAY
PAN
CURVE
FX SEND
MEMO
26