Setting Up Your Own Patch Sequences (Patch Chain)

What is a Patch Chain?
A Patch Chain is a sequence (that you create) of up to 16 Patches. The SPD-20 can store 8 of these Patch
Chains (A, b, C, d, e, F, G, H.)
fig.33
By setting up a Patch Chain that contains all the Patches needed for a stage set or a song, you can quick-
ly and easily access the Patches you need.
Setting up a Patch Chain
1In the Edit mode, press [PATCH CHAIN] to select a Chain (A, b, C, d,
e, F, G, H).
fig.36
2Use the PATCH/VALUE [-] or [+] buttons to select the Patch number
(1–99).
You can also select Patch numbers using a footswitch connected to the FOOT SW jack.
3Press [ALL/ENTER].
4Repeat steps 2–3 to create a Chain of Patches.
Each Chain can consist of up to 16 Patches. If you attempt to specify a 17th Patch, the display will
show “FUL.”
5When you are finished, press [ALL/ENTER].
fig.35
Step 1 Step 2 Step 3 Step 4 Step 16Step 5 • • •
• • •
• • •
• • •
Patch Chain A
Patch Chain B
Patch Chain H
ABCD
EFGH
MEMO
MEMO
33
1
2
3
4
5