Copying a Patch (COPY)

This operation copies Patch settings to another Patch. If you need another Patch that is only slightly dif-
ferent from an existing one, copy that Patch and then make the changes that you need.
fig.29-1
When you execute COPY, the contents of the copy destination patch are rewritten.
1In the Play mode, use PATCH/VALUE [-] or [+] to select the copy des-
tination Patch (199).
When you execute COPY, the data is overwritten in this patch.
2Press [EDIT] to enter the Edit mode.
3Press [COPY].
fig.32
4Use PATCH/VALUE [-] or [+] to select the copy source Patch.
The copy source Patch can be selected from user Patches (U1–U99) or factory-
preset Patches (P1–P99).
Play the pads to check the selected copy source Patch.
To quit without copying, press [COPY].
5Press [ALL/ENTER] and the Patch will be copied.
fig.32-a
6Press [EDIT] once again to return to the Play mode.
The external pad’s SOUND parameter, MIDI parameter, and FX/PEDAL settings are copied simulta-
neously.
Copy source
User Patch U1-U99
Preset Patch P1-P99 User Patch U1-U99

Patch

Copy destination

Patch

MEMO
MEMO
MEMO
32