Adjusting the Sensitivity of a Pad or Kick Trigger Unit (TRIG SENS)

This parameter adjusts the sensitivity of a pad or Kick Trigger Unit. Higher values will result in higher
sensitivity (setting range: 1–16). When external pads are connected, you should adjust the relative sensi-
tivity between the external and on-board pads so as to provide a balanced feel for the entire drum kit.
1In the Edit mode, select the SYSTEM parameter group (p. 21).
2Use [ ] or [ ] to select TRIG SENS.
fig.49
3Strike the pad (or depress the Kick Trigger Unit) you wish to edit.
When you strike the pad, the strength with which the pad is struck (velocity) is shown in the display
in six levels. Striking the pad hard sets velocity at a value of 127.
fig.95
4Use PATCH/VALUE [-] or [+] to set the value.
About the PD-120’s Rim Sensitivity
Available only when making Trigger Type settings to the PD-120, you can set the Rim Sensitivity in
Advanced Edit mode (p. 53).
MEMO
Velocity
Strength
of Striking
Hard 127
100–126
75–99
50–74
25–49
1–24Soft
43
1
2
3
4
5