Connect the pads and pedals to the TD-8

Connect the pads and pedals to the TD-8

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

	Crash
	CY-12R/C
		Ride
		CY-12R/C
	Tom 1
	PD-80	Tom 2
TD-8	Hi-Hat	PD-80
TD-8	PD-7
	PD-7
	Kick
	KD-80
	Snare
	PD-80R
Hi-Hat Control Pedal		Tom 3
	FD-6	Tom 3
	FD-6	PD-80
		PD-80

Page 14

Image 14

Roland TD-8KV owner manual Connect the pads and pedals to the TD-8

Contents

Page Page Page Additional Precautions PlacementMaintenance Getting Started Check the Contents of the BoxSetup Procedure About the Mesh Head Adjusting the Head TensionUse the included tuning key to tighten the tuning bolts KD-80 approximately 7.5 mm PD-80R/PD-80 approximately 7 mm Replaced When the Head Should BeReplacing the Head About the Lock Bushings Mount the stay on the pad Setting Pads and PedalsAssembling the KD-80 Bracket Tighten the T-bolts to secure the legs to the stand SpecificationsAdjust the striking point for the beater Lift the KD-80 and place the stand and the four legs PD-80R/PD-80 V-Pad Adjustment for Positional Sensing with the TD-8Use the included tuning key to tighten the stopper bolt Attaching the Pad to a Stand Output Jack Corresponding Tones Sounded Play Methods Playing the CY-12R/CMovement Troubleshooting PD-7 Pad FD-6 Hi-Hat Control Pedal Narrow Wide Connect the pads and pedals to the TD-8 Secure the cable with cable ties Connecting the CY-12R/CAbout the Included Cables Information 03012067 ’03-5-3N