Roland VR-760 Space-D, Stereo Chorus, 15 ST.FLANGER Stereo Flanger, Step Flanger, Stereo Delay

Effects/Parameter List

13: SPACE-D

This is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a transparent chorus effect.

Parameter	Value	Explanation
Pre Delay	0.0–100.0 ms	Adjusts the delay time from the di-
		rect sound until the chorus sound
		is heard.
Rate #	0.05–10.00 Hz	Frequency of modulation
Depth	0–127	Depth of modulation
Phase	0–180˚	Spatial spread of the sound
Low Gain	-15–+15 dB	Gain of the low range
High Gain	-15–+15 dB	Gain of the high range
Balance #	D100:0W–D0:100W	Volume balance between the direct
		sound (D) and the chorus sound
		(W)
Level	0–127	Output Level

14: STEREO CHORUS

This is a stereo chorus. A filter is provided so that you can adjust the timbre of the chorus sound.

Parameter	Value	Explanation
Pre Delay	0.0–100.0 ms	Adjusts the delay time from the di-
		rect sound until the chorus sound
		is heard.
Rate #	0.05–10.00 Hz	Frequency of modulation
Depth	0–127	Depth of modulation
Phase	0–180˚	Spatial spread of the sound
Filter	OFF, LPF, HPF	Type of filter
		OFF: no filter is used
		LPF: cuts the frequency range
		above the Cutoff Freq
		HPF: cuts the frequency range
		below the Cutoff Freq
Cutoff	200–8000 Hz	Basic frequency of the filter
Low Gain	-15–+15 dB	Gain of the low range
High Gain	-15–+15 dB	Gain of the high range
Balance #	D100:0W–D0:100W	Volume balance between the direct
		sound (D) and the chorus sound
		(W)
Level	0–127	Output Level

15: ST.FLANGER (Stereo Flanger)

This is a stereo flanger. (The LFO has the same phase for left and right.) It produces a metallic resonance that rises and falls like a jet airplane taking off or landing. A filter is provided so that you can adjust the timbre of the flanged sound.

Parameter	Value	Explanation
Pre Delay	0.0–100.0 ms	Adjusts the delay time from when
		the direct sound begins until the
		flanger sound is heard.
Rate #	0.05–10.00 Hz	Frequency of modulation
Depth	0–127	Depth of modulation
Feedback #	-98–+98%	Adjusts the proportion of the
		flanger sound that is fed back into
		the effect. Negative (-) settings will
		invert the phase.
Phase	0–180˚	Spatial spread of the sound
Filter	OFF, LPF, HPF	Type of filter
		OFF: no filter is used
		LPF: cuts the frequency range
		above the Cutoff Freq
		HPF: cuts the frequency range
		below the Cutoff Freq
Cutoff	200–8000 Hz	Basic frequency of the filter
Low Gain	-15–+15 dB	Gain of the low range
High Gain	-15–+15 dB	Gain of the high range
Balance	D100:0W–D0:100W	Volume balance between the direct
		sound (D) and the flanger sound
		(W)
Level	0–127	Output Level

16: STEP FLANGER

This is a flanger in which the flanger pitch changes in steps. The speed at which the pitch changes can also be specified in terms of a note-value of a specified tempo.

Parameter	Value	Explanation
Pre Delay	0.0–100.0 ms	Adjusts the delay time from when
		the direct sound begins until the
		flanger sound is heard.
Rate	0.05–10.00 Hz	Frequency of modulation
Depth	0–127	Depth of modulation
Feedback #	-98–+98%	Adjusts the proportion of the
		flanger sound that is fed back into
		the effect. Negative (-) settings will
		invert the phase.
Phase	0–180˚	Spatial spread of the sound
Step Rate #	0.10–20.00 Hz, note	Rate (period) of pitch change
Low Gain	-15–+15 dB	Gain of the low range
High Gain	-15–+15 dB	Gain of the high range
Balance	D100:0W–D0:100W	Volume balance between the direct
		sound (D) and the flanger sound
		(W)
Level	0–127	Output Level

17: STEREO DELAY

This is a stereo delay.

When Mode is NORMAL:

fig.02-017am

		Balance D	2-Band
L in				L out
			EQ
		Delay	Balance W
		Feedback
		Feedback
			Balance W
		Delay
R in			2-Band	R out
		Balance D	EQ
When Mode is CROSS:
fig.02-017bm
		Balance D	2-Band
L in				L out
			EQ
		Delay	Balance W
		Feedback
		Feedback
			Balance W
		Delay
R in			2-Band	R out
		Balance D	EQ
Parameter	Value		Explanation
Delay L	0.0–500.0 ms		Adjusts the delay time from the di-
Delay R			rect sound until the delay sound is
			heard.
Feedback #	-98–+98%		Adjusts the proportion of the delay
			sound that is fed back into the ef-
			fect. Negative (-) settings will in-
			vert the phase.
Mode	NORMAL, CROSS		Selects the way in which delay
			sound is fed back into the effect.
			(See the figures above.)
Phase L	NORMAL,		Phase of the delay sound
Phase R	INVERT
HF Damp	200–8000 Hz,		Adjusts the frequency above
	BYPASS		which sound fed back to the effect
			will be cut. If you do not want to
			cut the high frequencies, set this
			parameter to BYPASS.
Low Gain	-15–+15 dB		Gain of the low range
High Gain	-15–+15 dB		Gain of the high range
Balance #	D100:0W–D0:100W		Volume balance between the direct
			sound (D) and the delay sound (W)
Level	0–127		Output Level

Appendices

93