Roper ES, CoolSnap manual Detector

Detector

Rear Panel Description

The following connectors, display lights, and controls are located on the back of the cameras (pictured below).

DATA connector: for data transfer and power

•LVDS cameras: 20-pin, high-density connector

•IEEE-1394 cameras: 6-pin IEEE-1394 connector

EXPOSE OUT connector: BNC connector; the signal at the BNC connector will go to a TTL high level (+ 5 V) when the exposure begins; useful for synchronizing an external shutter in the illumination pathway; will not power the shutter

XFER display light: amber LED illuminates during data transfer

ON display light (LVDS camera)/PWR display light (IEEE-1394 cameras):

green LED illuminates when camera is powered on

POWER switch (LVDS cameras only): standard rocker switch

EXT PWR connector (IEEE-1394 cameras only): 5.5 x 2.1-mm DC jack for

auxiliary CoolSNAP power supply

CoolSNAP LVDS Rear Panel

CoolSNAP IEEE-1394 Rear Panel

18CoolSNAPcf /CoolSNAPES