Roper FES385Y warranty Whirlpool Corporation, LaPotte. IN OR

2.For best results, wipe off surface units with a damp sponge and soapy water after each use. Remove burned-on food with a soap- filled scrubbing pad. Rinse well. The red spot in the center of the surface unit will gradually wash off. This is normal and will not affect the operation of the surface unit.

NOTE: Make sure plastic scrubbing pad does not contain metal or abrasive particles. Do not use abrasive cleaners.

3.IMPORTANT: Dry the element completely after cleaning. Turn on the element for a few minutes to dry thoroughly. After the element has cooled, use a paper towel to apply a thin coat of salt-free oil to the suriace units to season and restore the finish. Wipe excess oil off stainless steel trim rings. Then heat 3-5 minutes. Some smoking m7-y occur; this is normal. If surface units have dark spots caused by grease and loo:!, the oil treatment will improve their appearance, but not eliminate the spots.

Optional: ElectroP dressing can be applied to the surface units to impro:o [heir appearance.

TO order information for ElectroP Dressing (Part No. 814030) write to:

Whirlpool Corporation

Attention: Customer Service Department 1900 Whirlpool Drive

LaPotte. IN 46350

OR

Call l-800-253-1301 to order. You must have a major credit card to order by phone.

26