tfYou Need Assistance Or Service
This section is designed to help you save the cost of a service call. First we outline possible problems, their causes and their solutions. However, you may still need assistance or service. When calling our
1. Before calling for assistance . . .
Performance problems often result from Tile thinas YOUcan find and fix without tools of any kind. Please check the chart below for problems you can fix.
PROBLEM
Nothing will operate
The oven will not operate
The surface units will not operate
Control knob(s) will not turn
The
POSSIBLE CAUSE
The power cord is not plugged into a live circuit with proper voltage.
A household fuse has blown or a circuit breaker has tripped.
The electronic controls have not been set correctly.
A delayed start time has been programmed.
A household fuse has blown or a circuit breaker has tripped.
The control knobs are not being set correctly.
You are not pushing in before turning.
The range clock does not show the correct time of day.
The Lock Lever is not in the Clean
A delayed start time has been programmed.
SOLUTION
Plug the power cord into a live circuit with proper voltage. (See Installation Instruc- tions.)
Replace household fuse or reset circuit breaker,
Refer to pages
Wait for the start time to be reached.
Replace household fuse or reset circuit breaker.
Push control knobs in before turning to a setting.
Push control knob(s) in before turning to a setting.
Reset clock to show the correct time of day. (See page 11.)
Move Lock Lever all the way to the right.
Wait for the start time to be reached.
continued on next page
29
