Ellow, or are noisy when turned off

Burner flames Air/gas mixture is incorrect. lift off ports, are

/ellow, or are noisy when turned off

Burner makes Burner is wet from washing.

rhgi:i noi=

Contact an authorized Roper service technician to check air/gas mixture.

Let dry.

Cooking results are not what IOU expected

You are not pushing in before turning.

The range is not level.

The oven temperature seems too low or too high.

The oven was not preheated as the recipe calls for.

The recipe has never been tested or is not from a reliable source.

The pans are not the type or size recommended in the recipe.

There is not proper air circu- lation around pan when baking.

Flame size does not fit the cooking utensil being used.

When broiling, you have not completely closed the broiler drawer.

There has been a power outage.

Push control knob(s) in before turning to a setting.

Level range. (See Installation

Instructions.)

Adjust the oven temperature control. (See “Adjusting the oven temperature control” on page 13.)

Preheat oven if called for in recipe.

Use only tested recipes from a reliable source.

Refer to a reliable cookbmk for recom- mended pan type and size.

Allow 1% to 2 inches (4-5 cm) on all sides of the pans for air circulation. There must be a minimum space of 1 inch (2.5 cm).

Adjust flame size to fit cooking utensil.

Completely close broiler drawer.

Reset the clock. (See page 11.)