Lift-up cooktop
1.Remove surface burner grates and reflector pans.
2.Lift front of cooktop at both front corners until the support rods lock into place.
- | . | I |
|
| |
| Personal Injury Hazard |
|
Be sure both support rods are fully extended and in the locked position.
Failure to do so could result in per- sonal injury from the cooktop acciden- tally falling.
Product Damage Hazard
Do not drop the cooktop.
Damage could result to the porcelain and the cooktop frame.
3.Wipe with warm, soapy water. Use a soapy
4.To lower the cooktop, lift cooktop from both sides while pressing the support rods back to unlock them. Lower the cooktop into place.
Replace reflector pans and surface burner grates.
Surface burners
1.Lift up the cooktop, following the instructions above.
2.Before cleaning, remove screws that hold each of the burners in place. The screws prevent the burners from moving during shipment. Remove the shipping screw with a Phillips screwdriver, lift the burner up, tilt it to one side at the end closest to the ignitor and move it toward the back of the range. This separates the burner from the gas valve at the front of the range, so it can be easily removed.
3.Wipe off surface burners with warm, soapy water and a sponge after each use. To remove
17
