Roper FGP335Y important safety instructions PROBLEM Cooking results are not what you expected

PROBLEM

Cooking

results are not what you expected

	POSSIBLE		CAUSE			SOLUTION
The	range	is not	level.		Level	range. (See Installation		Instruc-
					tions.)
The	oven	temperature		seems	Adjust	the oven temperature		control.
too low or too high.					(See	“Adjusting the oven	temperature
					control” on page 14.)
The oven was not preheated					Preheat oven when called for			in recipe.
before baking.
The recipe has never been					Use only tested recipes		from	a reliable
tested or is not from				a reliable	source.
source.

The pan used is not the type or Refer to a reliable		cookbook for recom-
size recommended in the	mended pan type	and size.
recipe.

There is not proper air circula- Allow 1% to 2 inches (4-5 cm) of air tion around pan when baking. space on all sides of pan. There must

be a minimum space of 1 inch (2.5 cm).

The display is flashing “88:88”

Tones are sounding and the display is flashing error

code

“F-1” _ “F-10”

Cooking utensil does not fit the surface unit being used.

There has been a power failure.

Pan should be the same size or slightly larger than surface unit being used.

Reset the clock. (See page 12.)

Push CANCEL. Call for service. (See Step 3 on page 35.)

34