Roper FGP335Y Your Range, Using the surface burners, This, Surface burner markers

Using			Your			Range
In This		Section									Page
						Page
Using	the	surface		burners		..........7	Adjusting		the	oven	temperature
Positioning			racks	and	pans .	..........9	control			.........	............................ 13
							Broiling				............................ 13
For best		air circulation			.	........ 10
					............		Energy saving			tips	............................ 14
Setting	the		clock	.,............................. 11
							The	oven	vent		............................ 15
Using	the		Minute	Timer .....s.............. 11						.......
							The	anti-tip	bracket		.......................... 15
Baking/roasting				..*	*	12

To obtain the best cooking results possible, you must operate your range properly. This section gives you important information for efficient and safe use of your range.

Using the surface burners

Your range is equipped with electric ignitors. Electric ignitors automatically light the burners each time they are used.

Push in the control knob and turnI

counterclockwise to the LITE position. The clicking sound is the ignitor sparking.

Visually check that burner has lit.

To stop the clicking sound after the burner lights, turn the control knob to the desired setting. You can set the control knob any- where between HI and LO.

Surface burner markers

The solid dot in the surface burner marker shows which surface burner is turned on by that knob.

Burner heat settings

Use correct burner heat settings (see next page). If the heat setting is too high, it can: l Char bacon and cause curling.

l Make eggs tough and crisp at the edges. l Toughen liver, fish and seafood

l Scorch delicate sauces and custards. l Cause a boilover.