Roper FGS397X warranty If the Self-Cleaningcycle will not operate, Whattodo, Check If

OPERATING PROBLEM Control knob(s) will not

If the Self-Cleaning cycle will not operate.

Cooking results are not what you expected

The oven temperature seems too low or too high.

[f there has heen a power interruption, the display will flash “88:88”.

“E”followed by a number Irom 1 to 8 shows in the 3nall display.

CHECK IF

nYOUpushed in knob(s) before trying to turn.

. The clock shows the correct time of day.

mThe Lock Lever is all the way to the right.

#You have set a delay start time.

. Flame size fits the cooking utensil being used.

. Pans are the size called for in the recipe.

. You are following a tested recipe from a reliable source.

. The cooking utensils have smooth, flat bottoms and fit the surface burners.

. When baking, you have preheated the oven as the recipe calls for.

. When baking, you have allowed 1 l/2 to 2 inches (4-5 cm) on all sides of the pans for air circulation.

l When broiling, you have completely closed the oven door. The broiler provides best cooking results with the oven door closed.

‘Your old oven was accurate. Your old oven may have shifted gradually while your new oven may be more exact.

WHATTODO

n Push in knob(s) before turning.

n Reset clock if necessary.

n Slide Lock Lever all the way to the right, if

necessary.

n Wait until the delay start time is reached.

mAdjustflame size to fit cooking UtensiL

nUse correct-size pans.

n Modify recipe or find a new recipe.

musecooking utensils with smooth, flat bot- toms.

n Preheat the oven according to recipe’s specifications.

n Reposition pans for best air circulation.

n Completely close oven door.

. If, after using the oven, you are not satisfied with the temperature settings, they can be adjusted by an authorized RoperSYservice technician. (See“Howto get service or assistance” on page 16.)

. Reset the clock (page 5).

. Call for service. (See “Howto get service or assistance” on page 16.)

Page 15