Roper REC3422A, RGC3422A, REP3422A warranty Diapers, baby clothes Elastlt Items

Curtalns, slipcovers

lDraperies, slipcovers

l Sheers, some synthetic curtains

l Bonded or laminated fabrics

Diapers, baby clothes

Elastlt Items

FIberglass materlals

Flame- retardant flnlshes

Napped

Items

lCorduroy, velveteen

Qullted, down- fllled Items

Snowsults,

Jackets

lNylon, polyester-base

Tlnted, dyed or noncolorfast Items

Remove drapery weights and hooks before laundering.

1.Use lowest temperature or an Air setting.

2.Leave room in dryer for load to fluff.

3.Remove from dryer while slightly damp. Do not overdry.

For slipcovers, replace while still slightly damp. They will dry to fit tightly. Dry only a few minutes.

Do not overdry or tumble in high heat. Overdrying loosens the adhesive and causes fabrics to separate.

Wash and dry small items in a mesh bag or pillowcase for convenient handling.

1.Dry according to fabric and cycle settings listed on page 8.

2.Remove diapers and cotton knit items while still slightly damp. They will feel softer, shrink less, and be easier to fold.

Dry at lowest temperature setting. Remove from dryer while still slightly damp.

Do not machine wash or dry fiberglass materials. Small particles can stick to fabrics washed or dried in following loads and cause skin irritation.

Some items have been treated with a flame-retardant finish to improve their resistance to burning. Such items are clearly labeled. To retain flame-retardant qualities through continuous use and washing, clean and dry according to the manufacturer’s instructions.

Dry separately or with similar colors to avoid lint transfer. Follow care label directions.

1.Dry according to fabric and cycle settings shown on page 8.

2.Remove from dryer while there is still a trace of moisture.

3.Smooth, reshape and air dry before putting away.

Follow care label instructions.

1.Dry one at a time.

2.Remove from dryer and shake or fluff the item during the drying cycle.

3.Smooth and reshape before putting away.

Check label for fiber content, then see page 8 for cycle and temperature recommendations.

Follow care label directions.

1.Dry garment for about 10 minutes. Remove and turn inside out. Dry for 10 more minutes.

2.Remove from dryer immediately and hang on a nonrusting hanger to finish drying. This will help eliminate wrinkles.

Dry according to fabric, weight and care label instructions. Wipe the dryer drum carefully to remove any dye or lint that can be transferred to other loads. See “Cleaning the dryer interior” on page 10.

14