Operating Your Dryer
In This Section | Paw |
| Paw | ||
|
|
|
| ||
Before | starting your | dryw | .....6 | Selecfing a cycle | ....*..7 |
Starting | or stopping | your dryer | .....6 |
|
|
Operating your dryer properly assures the best drying results. This section gives you important information to help you to select a cycle, time, and temperature.
Before starting your dryer
Refer to the information below, and ‘Laundry Tips” on page 12 for control setting, sorting, and loading information.
NOTE: Remove any hang tags or temporary labels before using your dryer. Wipe dryer drum with a damp cloth to remove dust from storing and shipping.
Starting or stopping your dryer
Starting your dryer
Close the door and select a cycle and tempera- ture. Push the Start button. See pages
Stopping and restarting your dryer
Open the dryer door or turn the Cycle Control Knob to OFF. Close the door: make new selec- tions (if necessary). Push the Start Button.
NOTE: The Cycle Control Knob should point to an OFF area when the dryer is not in use. If the dryer is stopped before the cycle is finished, turn the Cycle Control Knob to an OFF area.
End of cycle signal
The dryer sounds a signal to let you know when the cycle is finished. The signal is not adjustable and cannot be turned off.
The signal is helpful when you are drying permanent press, synthetics, and other items that should be taken out as soon as the dryer stops.
