Frequently Asked Questions
Frequently Asked Questions
Why don’t I hear ClearVue sound over my radio?
Try both 89.1 FM and 88.7 FM on your radio dial, and make sure that the FM Modulator is on by pressing and releasing the “SPEAKER ON/OFF” button on the remote until “FM ON” is displayed on the screen.
Why doesn’t the TV button on the remote turn on the TV Tuner?
Some buttons on your ClearVue remote are for other Rosen systems and products. Use the MODE button to turn the TV Tuner on with your system.
How do I change channels on the TV Tuner?
Press the up and down arrow buttons on the remote.
Why did the headphones stop working?
Check the power switch and the volume control. Check the MUTE button on the remote. Then try adding new batteries.
Why did the remote stop working?
Direct remote towards the black oval above the monitor when pressing buttons. Then try adding new batteries.
Why do I have poor ClearVue sound quality sometimes over the speakers?
You may be in an area that has a strong radio signal at the same FM frequency as the FM Modulator. See your Rosen dealer to have the ClearVue FM frequency reset.
Why do I have a poor Video on my screen?
Your DVD players setup may be set to PAL. Check to verify that your “TV Type” in the setup menu is set to NTSC.
About the ClearVue 6821 DVD System
About the ClearVue 6821 DVD System
Welcome to the ClearVue 6821 DVD System Owner’s Manual. The ClearVue 6821 DVD system includes the following components:
•Overhead Monitor
•DVD Player with TV Tuner
•Wireless IR Headphones (2 pair)
•Wireless IR Transmitter Dome
•Remote Control
•FM Modulator (enables the DVD sound to be heard over your vehicle’s speakers).
•Vehicle Trim Ring
•Other parts and cables which are installed out of sight in your vehicle.
Note: The system is intended to be used with your ignition key switch in the Run or Acc position. Extended use of the system without the engine running should be avoided, as it could drain the battery.
Page 23 | Rosen Products | ClearVue 6821 DVD System Owner’s Manual | Page 4 |
