Advanced Functions
DVD Menus
Most DVD discs have unique menu structures. DVD menu contents and operation may differ from disc to disc.
To use DVD menus:
1During DVD playback, press the MENU button. The DVD menu available on the disc appears on the screen.
2Use the up, down, left and right arrows to select the preferred menu option.
3Press PLAY/PAUSE when the desired option is selected.
Title Menu
Some DVD discs also include more than one title.
To change titles:
1During DVD playback, press the TITLE button. A list of the titles available on the DVD appears on the screen.
2Use the up, down, left and right arrows to select a title.
3Press the ENTER button when the desired option is selected.
Display Menu
The DISPLAY function enables you to view the status, current title number, track number and the total playing time of the disc on the monitor.
To display status information for VCDs and DVDs:
Press the DISP button repeatedly to cycle through the following information on the monitor:
•“Title x/y and Chapter
•“Title
•“Chapter
Operating the System
the batteries, remove the battery compartment cap on the right earpiece and insert batteries, as shown.
Using the Car Speakers
To listen to system audio through your car speakers:
1Insert a disc.
2Turn on the car radio.
3Tune the car radio to the FM frequency 88.7; this is the default system frequency.
If audio from the system does not play over the car speakers:
1Press SPEAKER ON/OFF on the remote control until “FM ON” appears on the screen.
and /or
2Tune the radio to 89.1 FM. This is an alternate system fre- quency.
To turn off audio over the car speakers, press SPEAKER ON/OFF on the remote. Audio from the system is then available over the headphones only.
Note: Leaving the system to SPEAKER ON mode will reduce the performance of normal radio reception. To receive the best reception, always turn the system to SPEAKER OFF when not in use.
Page 19 | Rosen Products | ClearVue 6821 DVD System Owner’s Manual | Page 8 |
