Rosewill Windows XP Driver Installation, E-SATA 1.5G 1+1 Port PCI Adaptor RC210, User Manual

E-SATA 1.5G 1+1 Port PCI Adaptor RC210 User Manual

5.Select Silicon Image Sil-3x12 SATALink Controller Driver and press Enter.

6.Press Enter to continue and follow on-screen instructions to complete installation.

Add Windows 2000 Driver on Original Booting Device

1.After the SATA PCI Host Adapter and attached drives are configured, boot up Windows.

2.At the Found New Hardware Wizard, click Next.

3.Select Search for a suitable driver for my device (recommended) and click Next.

4.Insert the Driver CD in your CD-ROM/DVD drive, check Specify a location, uncheck the other boxes, click Next, type in E:\ (If your CD-ROM/DVD is E:\). Click Browse.

5.Points specify a location, example E:\SATA Non-Raid_2Port\ Sil3x12\ Win98_me _2000_xp_ nt4.0 \ Driver, click Open then OK.

6.If the Digital Signature Not Found message appears, click Yes. (Note If prompted for Windows 2000 CD-ROM, insert the CD and click OK. Type in E:\I386, click OK and Finish.

(assuming E: is your CD-ROM drive))

7.Click Finish.

2.5. Windows XP Driver Installation

For New Windows XP Systems

1.Before installation, copy all the files under directory E:\SATA Non-Raid_2Port\ Sil3x12\ Win98_ me _2000_xp_nt4.0\driver\ *.* to a blank floppy disk.

2.After the SATA PCI Host Adapter and attached drives are configured, follow Microsoft procedures to install Windows accordingly.

3.At the Windows Set-up screen, press F6 in order to specify and add the driver.

4.Insert the Driver diskette. Press S then press Enter.

5.Select Silicon Image Sil-3x12 SATALink Controller Driver and press Enter.

6.Press Enter to continue and follow on-screen instructions to complete Windows XP installation. Note: When the Software Installation warning pops up, click Yes. And when the Hardware Installation warning pops up, click Yes again.

Add Windows XP Driver on Original Booting Device

1.After the SATA PCI Host Adapter and attached drives are configured, boot up Windows.

2.At the Found New Hardware Wizard, check Install from a list or specific location (advanced), then click Next.

3.Insert the Driver CD. Check Include this location in the search, uncheck the other box, type in E:\, and click Browse.

4.Points specify a location, example E:\SATA Non-Raid_2Port\ Sil3x12\ Win98_me _2000_xp_ nt4.0 \ Driver, click OK then Next.

5.When a warning message pops up, click Continue Anyway, then click Finish.