200Mbps Powerline | - | User’s Manual | |
|
|
|
|
panel will disappear and devices in the target network will appear on the lower panel.
Scan
The Scan button is used to perform an immediate search for HomePlugAV devices connected to the powerline network. By default, Powerline Utility automatically scans every a few seconds and updates the displayed information.
Firmware Upgrade
The Firmware Upgrade button is used to upgrade the device firmware.
Note:
Only devices that have their password verified can achieve firmware upgrade by clicking Firmware Upgrade.
The steps for upgrading firmware are as follows:
Step 1 Select a local device from the top panel.
Step 2 Click Firmware Upgrade.
Step 3 Click Browse to choose a configuration file (fw_upgrade,
Step 4 Click OK.
It takes several minutes to complete firmware upgrade. Do not interrupt the upgrade process.
2.2.2 Information Tab
The Information screen shows the system information and the firmware version.
