Rotel RCD-971 owner manual Random Button 5, Repeat Button 9, Scan Button 10, Time Button 12

RANDOM Button 5 25

This instructs the CD player to play tracks from the entire disc in random order. Once all of the selections have been played once, the disc will stop playing, unless the REPEAT Button (see below) has been engaged, in which case the random play will continue until the STOP button is pressed. When the RANDOM button is en- gaged, the word RANDOM appears in the Display.

REPEAT Button 9 23

This button allows you to repeat the current track or the entire disc continuously until the feature is cancelled by disengaging the REPEAT button or pressing STOP. The REPEAT button steps se- quentially through the available options. Press the button once and the RCD-971 will repeat just the current track, displaying the indicators REPEAT 1 in the Display. Press the button a second time and the RCD-971 will repeat the entire disc, displaying REPEAT ALL in the Display. Press the button a third time to cancel the RE- PEAT function.

As noted above, REPEAT can be used in conjunction with the RANDOM play feature.

Note: The REPEAT function is automatically cancelled when the disc drawer is opened.

SCAN Button 10 24

This feature automatically plays the first ten seconds of each track on the disc (or the memorized program). To activate the fea- ture, press the SCAN button. The word INTRO appears in the Dis- play. To stop scanning and resume normal operation at the current track, press the SCAN button again or press the PLAY button.

TIME Button 12 28

Normally, the RCD-971 displays the elapsed time of the currently playing track. The TIME button allows you to step through two al- ternative time displays. Pressing the button once displays the time remaining in the current track, which counts down as the track continues playing. Pressing the button a second time displays the time remaining on the entire disc (or memorized program). Press- ing the button a third time reverts to the standard elapsed time display. When the TIME feature is activated, the word REMAIN appears in the Display.

	English
Specifications
Total Harmonic Distortion + Noise	0.0035% @ 1kHz
Intermodulation Distortion	0.0035% @ 1kHz
Frequency Response (± 0.5 dB)	20-20,000 Hz
Channel Balance	± 0.5 dB
Phase Linearity	± 0.5 degree
Channel Separation	> 110 dB @ 1kHz
Signal to Noise Ratio	> 107 dB
Dynamic Range	> 100 dB
Digital to Analog Converters	Dual 20 Bit, precision DAC
Digital Filter	20 Bit, 8x oversampling
Speed Accuracy, Wow & Flutter	Quartz Crystal Precision
Output Impedance	100 Ohms
Digital Output	0.5 Volt, Peak to Peak
Load Impedance	75 Ohms
Power Requirements	120 Volts, 60 Hz or
	220-240 Volts, 50 Hz
Power Consumption	20 Watts
Dimensions (W, H, D)	440 x 72 x 316 mm
	173/8 x 27/8 x 127/16 inches
Weight (net)	5.4 kg, 11.9 lb.

All specifications are accurate at the time of printing. Rotel reserves the right to make improve- ments without notice.

Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.

HDCD is a registered trademark of Pacific Microsonics, Inc., Berkeley, CA, USA.

5