Rotel RDV-1093 owner manual Specifications

RDV-1093DVD Audio/Video Player

Picture

Picture is noisy.

•The player is connected to a VCR directly and the copy guard function is activated. Connect the player directly to the TV.

Cannot get correct picture on TV.

28

Specifications

General

Readable discs:

DVD-Audio, DVD-Video, Audio CD, MP3 in CD-R/ RW, DVD-/+R

Video format:

PAL or NTSC. 480i/576i, 480p/576p, 720p, 1080i, 1080p.

Audio output

Analog Out (pin jack): 2.0 Vrms (220 ohms)

Digital Out:

Optical: –21dBm to –15dBm (Peak)

Coaxial: 0.5 Vp-p (75 ohm)

Audio characteristics

•Connect the RDV-1093 to the TV with the correct kind of cable.

•Make sure that the Video Output setting matches the correct resolution of your TV. You cannot display progressive scan video on standard definition TVs.

•Make sure that the PAL/NTSC setting matches your TV.

Picture does not fill screen.

Other

Power requirements:

AC 110-240 V, 50/60 Hz

Power consumption:

26 W

Weight:

5.1 kg (11.2 lbs)

Dimensions (W x H x D):

432 mm x 92 mm x 336 mm 17.01” x 3.62” x 13.23”

Front Panel Height

(feet removed/for rack mount) 80 mm/3.15”

Frequency response:

CD (at 44.1 kHz): 2 Hz to 20 kHz

DVD (at 48 kHz): 2 Hz to 22 kHz

DVD (at 96/88.2 kHz): 2 Hz to 44 kHz

DVD (at 192/176.4 kHz) : 2 Hz to 88 kHz

Dynamic range:

16 bit: more than 100 dB

20 bit: more than 110 dB

24 bit: more than 110 dB

Wow and flutter: Unmeasurable (less than ± 0.002%)

Total harmonic distortion:

16 bit: less than 0.0018%

20/24 bit: less than 0.0012%

• Set ASPECT RATIO correctly.

HDMI LED flashing continuously and no picture.

•HDMI components must be Ver. 1.1 compat- ible.

•HDMI cables must be 5 meters or less in length.

No picture at Component video.

•Most DVD Video discs are Macrovision, HDCP compliant. Set the Output format of High Definition setup change to Progressive (480p/576p) or interlace (480i/576i).

Video output

COMPONENT (pin jack):

Y Output: 1.0 Vp-p (75 ohm)

PB/PR Output: 0.7 Vp-p (75 ohm)

VIDEO OUT (pin jack): 1.0 Vp-p (75 ohm)

S-VIDEO OUT (S jack):

Y Output: 1.0 Vp-p (75 ohm)

C Output (NTSC): 286 mVp-p (ohm)

C Output (PAL): 300 mVp-p (75 ohm)

HDMI: Version 1.1

Signal to noise ratio:

65 dB

All specifications are accurate at the time of print- ing.

Rotel reserves the right to make improvements without notice.

Rotel and the Rotel HiFi logo are registered trade- marks of The Rotel Co, Ltd., Tokyo, Japan.

Audio

No sound.

•Check the audio cable connection and input settings on preamplifier.

Garbled sound.

• Clean the disc surface.