Rotel RSX-1065 owner manual Zone 2 Setup Menu, Audio, AM Tuner, Video, FM Tuner

RSX-1065Surround Sound Receiver 30

ZONE 2 SETUP Menu			Specifications
	ZONE2 SETUP		Audio
	SOURCE: CD		Continuous Amplifier Power
	VOLUME SETUP: Variable		(five channels driven)
	VOLUME: 20		100 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
			Continuous Amplifier Power
			(two channels driven)
	ENT KEY=MAIN MENU	UP KEY=up	120 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
	+/– KEY=change	DWN KEY=down	Total Harmonic Distortion
			<0.05%

Antenna Input

75 ohms unbalanced

AM Tuner

Sensitivity

500 μV/m

Signal to Noise Ratio 40 dBf

Output level 500 mV

Antenna Input

Loop Antenna

The ZONE 2 SETUP menu provides settings and configuration options related to the op- eration of Zone 2. This menu is reached by highlighting the ZONE 2 line on the MAIN menu and pressing ENTER.

SOURCE: the source selected for listening in Zone 2. Selecting the OFF option turns Zone 2 off.

VOLUME SETUP: configures the Zone 2 outputs for VARIABLE or FIXED volume levels. VARIABLE allows control of the volume settings in Zone 2 from the RSX-1065 front-panel or from a remote control/IR repeater or keypad in Zone 2. FIXED output disables the Zone 2 volume control. In this mode, the Zone 2 level can be fixed at the level specified on the next line, thus optimizing system performance when sending a fixed level signal to a preamp or amplifier with its own volume adjustment.

VOLUME: In VARIABLE output mode, this line shows the current volume setting for Zone 2. In FIXED output mode, this volume setting es- tablishes a permanent fixed output level for Zone 2.

Move the highlight to the desired line using the UP/DOWN buttons and use the +/– but- tons to adjust the volume level. To return to the MAIN menu, press the ENTER button. Press the MENU key on the remote to cancel the display and return to normal operation.

Intermodulation Distortion (60 Hz:7 kHz) <0.05%

Frequency Response

10 Hz - 95 kHz, ±1 dB (line level)

10 Hz - 20 kHz, ±0.3 dB (digital level)

Signal to Noise Ratio (IHF A-weighted)

95 dB (Stereo) Analog

92 dB (Dolby Digital, dts) 0dBFs

Input Sensitivity/Impedance

Line Level: 200 mV/47 kohms

Tone Controls (Bass/Treble)

±8 dB at 100 Hz/10 kHz

Preamp Output Level

1.2 V (200 mV Input)

Video

Frequency Response

3 Hz – 10 MHz, ± 3 dB

Signal to Noise Ratio

45 dB

Input Impedance 75 ohms

Output Impedance 75 ohms

Output Level 1 volt

FM Tuner

Usable Sensitivity

14.2 dBf

Signal to Noise Ratio (at 65 dBf)

70 dBf

Harmonic Distortion (at 65 dBf)

0.03%

Stereo Separation (1 kHz)

45 dB

Output level 1 V

General

Power Consumption:

550 watts

Power Requirements (AC)

115 volts, 60Hz (USA version)

230 volts, 50Hz (CE version)

Weight

20.4 Kg/44.9 lb.

Dimensions (W x H x D) 432 x 189 x 427 mm

17" x 71/2" x 167/8"

Front Panel Height

(feet removed/for rack mount)

176 mm / 7"

All specifications are accurate at the time of printing.

Rotel reserves the right to make improvements without notice.

Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.