22 |
|
COMPONENT VIDEO
For
For Composite Video connections: Connect an
Note: Use the INPUT SETUP screen to assign the video input you have used to the DVD source.
Digital audio connection: Connect the digital output of the DVD player to any one of the DIGITAL IN OPTICAL
Note: Use the INPUT SETUP screen to assign the digital input to the same video input source used above.
Optional analog audio connection: If you want to record the audio signal from the DVD player, connect the left and right analog outputs from the DVD player to one pair of VIDEO IN
Cable, Satellite, or HDTV Tuner duflx
See Figure 8
TV tuner connections can be made using HDMI, Component Video, S- Video, or Composite video connections.
Note: You must use either HDMI or Component Video connections for high definition tuner, satellite, or cable receiver. You must make a Composite Video connection if you want to use the signal in one of the three remote zones.
For HDMI connections: Connect an HDMI cable from the output of the TV tuner to one of the HDMI IN
For Component Video connections: Connect a set of three Component Video cables from the output of the TV tuner to one of the COMPONENT VIDEO
For
For Composite Video connections: Connect an
Note: Use the INPUT SETUP screen to assign the video input you have used to the TV Tuner source.
Digital audio connection: Connect the digital output of the TV tuner to any one of the DIGITAL IN OPTICAL
inputs on the receiver. An HDMI cable carries both digital video and digital audio signals; therefore, no separate digital audio connection needs to be made.
Note: Use the INPUT SETUP screen to assign the digital input to the same video input source used above.
Optional analog audio connection: If you want to record the audio signal from the TV tuner, connect the left and right analog outputs from the TV tuner to one pair of VIDEO IN
Audio Recorder uok
See Figure 11
Connect the left and right analog outputs from an audio tape deck to the TAPE IN jacks (left and right).
Connect the left/right TAPE OUT jacks to the inputs on the audio tape deck.
Optional: For a digital recording device, connect the digital output of the recorder to one of the OPTICAL IN or COAXIAL IN digital inputs on the receiver. Use the INPUT SETUP screen to assign that digital input to the TAPE source. If the recording device accepts a digital recording input, connect one of the OPTICAL OUT or COAXIAL OUT connections to the digital input of the recorder.
No video connections are required for an audio recording device.
Video Recorder ydfg
See Figure 9
VCR connections can be made to the VIDEO 1 or VIDEO 2. If you choose VIDEO 1, make sure that you use VIDEO 1 inputs and outputs for all analog audio and video connections.
Composite connections: Connect an RCA video cable from the output of the VCR to the COMPOSITE IN 1 or 2 input. Connect an RCA video cable from the COMPOSITE OUT 1 or 2 jack to the VCR inputs.
Audio Connections: Connect the left and right analog outputs from the VCR to either the VIDEO IN 1 or VIDEO IN 2 audio inputs. Connect the left and right VIDEO OUT 1 or VIDEO OUT 2 audio outputs to the analog inputs on the VCR.
Optional Digital Audio: For a digital recording device, connect the digital output of the recorder to one of the OPTICAL IN or COAXIAL IN digital inputs on the receiver. Use the INPUT SETUP screen to assign that digital input to the VIDEO source (VIDEO 1, 2, or 3) used for the previous connections. If the recording device accepts a digital recording input, connect one of the OPTICAL OUT or COAXIAL OUT connections to the digital input of the recorder.
27/8/08 14:22:12
