RotoZip DR1 manual Extension Cords, Accessories & Attachments, Cleaning

RZ 2610955525 10-07 10/11/07 8:19 AM Page 11

Cleaning

!To avoid accidents always disconnect the tool from the WARNINGpower supply before cleaning or

performing any maintenance. The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when cleaning tools with compressed air.

Ventilation openings and switch levers must be kept clean and free of foreign matter. Do

not attempt to clean by inserting pointed objects through openings.

!Certain cleaning agents plastic parts. and solvents damage CAUTION Some of these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household

detergents that contain ammonia.

Extension Cords

! WARNING		If an extension cord is	RECOMMENDED SIZES OF EXTENSION CORDS
		necessary, a cord with	120 VOLT ALTERNATING CURRENT TOOL
adequate size		conductors that is capable	Tool’s	Cord Size in A.W.G.				Wire Sizes in mm2
of carrying the current necessary for your			Ampere
				Cord Length in Feet				Cord Length in Meters
tool must be used. This will prevent			Rating
excessive voltage drop, loss of power or				25	50	100	150	15	30	60	120
overheating.	Grounded tools must use 3-		3-6
				18	16	16	14	0.75	0.75	1.5	2.5
wire extension cords that have 3-prong plugs			6-8	18	16	14	12	0.75	1.0	2.5	4.0
and receptacles.			8-10	18	16	14	12	0.75	1.0	2.5	4.0
NOTE: The smaller the gauge number, the			12-16	14	12	—	—	—	—	—	—
heavier the cord.			10-12	16	16	14	12	1.0	2.5	4.0	—

Accessories & Attachments

		Use only recommended
!	WARNING
		accessories with this tool.

Do not use metal cutting bits, router bits, or non-approved accessories with this product. See list of approved accessories in manual. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

Drywall XBITS™ (Ø5/32”)

XB-DW2 / XB-DW10 Drywall XBITS™ with Guidepoint (available in 2-pack or 10-pack)

		For drywall cutting only.
!	WARNING
		Your DR1 Drywall Router

was designed specifically for cutting drywall. Rotozip offers products to cut a wide range of materials. If your cutting requirements extend to materials beyond drywall, please contact your local Rotozip retailer, Rotozip Customer Service, or www.Rotozip.com for further information on our products.

Drywall Zip® Bits (Ø1/8”)

GP10 / GP20 Guidepoint Zip® Bit (available in 10-pack or 20-pack)

-11-