Rover 5377 - 12HP owner manual Specifications

ROVER RANGER

Machine Model No.	5377
Engine Model No.	281707
Single Cylinder	Briggs & Stratton
4 Stroke	12Hp 465cc
Fuel Capacity	4.0 Litres
Oil Capacity	1.42 Litres
Lubrication	Gear Impellor
Spark Plug type	Champion CJ8
Spark Plug gap	0.7 to 0.8mm
Ignition type	Magnetron
Engine Oil	10w-30 or SAE 30

SPECIFICATIONS

To emphasise special information the words WARNING and CAUTION are used.

WARNING: The safety of the user and others involved.

Personal injury may result should this information be disregarded.

CAUTION: Follow these instructions carefully to avoid mower damage and loss of warranty.

TRANSMISSION

Auto-Drive system consists of a continuous belt being driven by an idler pulley over two drive pulleys and around a return pulley. Friction plates are brought into contact with the drive pulleys to impart either forward or reverse motion to rear drive wheels by means of a drive selector pedal on the right side of the machine.

Ground speed at 3600 rpm is variable due to Auto – Drive system depending on pressure applied to drive selector pedal.

Max. speed = 8.6 km/hr

STEERING WHEEL

325MM Dia. Steering Wheel. 1 ¼ turns lock to lock.

CLUTCH/BRAKE PEDAL

Foot operated pedal. Left side of machine.

PARKING BRAKE KNOB

Hand operated catch. Left hand side. Used in conjunction with clutch/brake pedal.

CUTTING HEAD

Model 160 Full floating pressed steel housing with right side discharge. Width of cut 760 mm (30”).

DRIVE SELECTOR

Foot operated pedal located on right side of machine. Spring loaded so as to return to neutral position.

TYRES

Front Tyres:	4.1 x 6 Tube
	Pressure 140 KPA maximum
Rear Tyres:	16 x 6.5 x 8 Tubeless
	Pressure 96 KPA maximum

CONTROLS

∗Throttle control with Fast, Slow and Choke positions;

∗Key switch with Off, On and Start positions;

CUTTING HEIGHT

Lever right hand side. 8 height of cut positions from 15mm to 65mm.

CUTTER DRIVE

Lever located left side of seat cowl.

GENERAL

Wheel Base: 135cm	Length:	164cm
Track 63cm. R 69cm F	Width:	80cm
Turning Circle: 5.8m	Height:	95cm
Turning Radius: 2.0m	Weight:	195kg

2