Terminal # |
|
| Description |
| Usage |
|
|
|
|
|
|
|
|
|
|
| PS1 Live / + is connected to the positive (+) terminal if the |
1 |
|
| PS1 Live / + |
| power source is DC or to the (Live) terminal if the power |
|
|
|
|
| source is AC. |
|
|
|
|
| PS1 Surge Ground is connected to the Chassis Ground via |
2 |
|
| PS1 Surge Ground |
| a jumper on the terminal block. Surge Ground is used as the |
|
|
| ground conductor for all surge and transient suppression | ||
|
|
|
|
| |
|
|
|
|
| circuitry. |
|
|
|
|
| PS1 Neutral / - is connected to the negative |
3 |
|
| PS1 Neutral / - |
| the power source is DC or to the (Neutral) terminal if the |
|
|
|
|
| power source is AC. |
|
|
|
|
| Chassis Ground is connected to the Safety Ground |
4 |
|
| Chassis Ground |
| terminal for AC inputs or the equipment ground bus for DC |
|
|
| inputs. Chassis ground connects to both power supply surge | ||
|
|
|
|
| |
|
|
|
|
| grounds via a removable jumper. |
|
|
|
|
| PS2 Live / + is connected to the positive (+) terminal if the |
5 |
|
| PS2 Live / + |
| power source is DC or to the (Live) terminal if the power |
|
|
|
|
| source is AC. |
|
|
|
|
| PS2 Surge Ground is connected to the Chassis Ground via |
6 |
|
| PS2 Surge Ground |
| a jumper on the terminal block. Surge Ground is used as the |
|
|
| ground conductor for all surge and transient suppression | ||
|
|
|
|
| |
|
|
|
|
| circuitry. |
|
|
|
|
| PS2 Neutral / - is connected to the negative |
7 |
|
| PS2 Neutral / - |
| the power source is DC or to the (Neutral) terminal if the |
|
|
|
|
| power source is AC. |
8 |
|
| Relay NO Contact | Normally open, failsafe relay contact. | |
9 |
|
| Relay Common | Failsafe relay common contact. | |
10 |
|
| Relay NC Contact |
| Normally closed, failsafe relay contact. |
Table 3: RS416 Power terminal block connection description
| 14 |
2008 RuggedCom Inc. All rights reserved | Rev104 |
