Rugged Outback RS416 manual DC Power Supply Wiring Examples, DC Power supply wiring examples

Figure 9:

4.2.2 DC Power Supply Wiring Examples

DC Power supply wiring examples

NOTES:
1.	88-300VDC rated equipment: A 300VDC appropriately rated circuit breaker must be
	installed within 3m of unit.
2.	A circuit breaker is not required for 12, 24 or 48 VDC rated power supplies.
3.	Equipment must be installed according to the applicable country wiring codes.
4.	When equipped with two HI voltage power supplies, independent AC sources can be
	used to power the product for greater redundancy. However, separate circuit breakers
	must be installed and separately identified.
5.	When equipped with two DC voltage power supplies (88-300VDC rated); independent
	DC sources may be used to power the product for greater redundancy. However,
	separate circuit breakers must be installed and separately identified (as shown in the
	above figure).

16

 2008 RuggedCom Inc. All rights reserved Rev104