Runco CX-52HD Connections to the Crystal Series LCD, Connecting the Crystal, Series LCD to Source

Installation

3.4

Connections to the Crystal Series LCD

Proceed as follows to connect the Crystal Series LCD to your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

	• Ensure that the cables are securely connected. Tighten the thumbscrews on
	connectors that have them.
	• Use the left audio input when connecting mono audio sources.
Connecting the Crystal ➤	Connect your video sources to the Crystal Series LCD as shown and described in the
Series LCD to Source	sections that follow.
Components	Antenna/Cable TV Connection (CX-52HD only): Connect your antenna or cable
	television source to the AIR or CABLE jacks on the rear of the Crystal Series LCD; see
	Figure 3-1.

Input Panel

Cable Television

Network

Figure 3-1. Antenna/Cable TV Connection (CX-52HD only)

16 Runco CX-52HD/CX-57HD Owner’s Operating Manual