Runco CX-52HD, CX-57HD OFF / on, Numeric Buttons, Source Selection Buttons, Memory Preset Buttons

Controls and Functions

1.OFF / ON

Use these buttons to turn the Crystal Series LCD on or off.

2.Numeric Buttons

Use these buttons to enter menu pass codes.

CX-52HD only: Use the numeric buttons to enter TV channel numbers. Use the TV button to switch to the Antenna/DTV/CATV input. Use the - button to enter DTV sub-channel numbers.

3.Source Selection Buttons

INPUT 1

Press this button to switch to Input 1.

INPUT 2

Press this button to switch to Input 2.

INPUT 3

Press this button to switch to Input 3.

INPUT 4

Press this button to switch to Input 4.

Input 1 and Input 2 have both S-Video and composite video Note connectors. Input 3 and Input 4 have both component and

composite video connectors.

To specify which connection type you are using – or to switch from one to the other if equipment is connected to both – use the Input Selection menu under Setup (refer to Input Selection on page 38).

HDMI 1 / HDMI 2

Use these buttons to select a Digital Video input (HDMI 1 or HDMI 2).

RGB HD

Press this button to switch to the RGB HD input.

4.Memory Preset Buttons

CUST

Press to recall settings for the current input from the “Custom” memory preset.

ISF NT (Night)

Press to recall settings for the current input from the “ISF Night” memory preset.

ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

10 Runco CX-52HD/CX-57HD Owner’s Operating Manual