Operation

The Main Menu is the starting point for accessing all Crystal Series LCD functions.

(The ISF Calibration menu is not accessible until you enter a passcode.)

Main Menu

Runco CX-52HD

Source

Aspect Ratio

Picture Adjust

Audio

Channel

Timer

Setup

ISF Calibration

From the Main Menu, select Source to choose a video signal source.

Source

The active source is indicated by an arrow (>) to its left; in the example at right, TV is the

active source.

> TV

Input1

Input2

Input3

Input4

RGB

HDMI1

HDMI2

To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program material being viewed; refer to Table 4-1.

The currently-selected aspect ratio is indicated by an arrow (>) to its left; in the example at right, Anamorphic is selected.

Note

The aspect ratio selection persists until you change it. (It is not

saved independently for each input.)

Aspect Ratio

>16:9

4:3 Letterbox VirtualWide

Runco CX-52HD/CX-57HD Owner’s Operating Manual

27

Page 39
Image 39
Runco CX-57HD, CX-52HD manual Main Menu, Source, Aspect Ratio, Input1 Input2 Input3 Input4, Letterbox VirtualWide