Rear Panel
1 | 5 |
|
|
|
|
|
|
|
|
COMLINK OUT |
|
|
|
|
|
|
|
|
|
12V FUSE |
|
|
|
|
|
|
|
|
|
|
| RGB VIDEO OUTPUT |
|
|
| VIDEO INPUTS | |||
V | H | B | G | R | HDTV/COMPUTER | Y | Pr | Pb | |
MASK SCREEN
CAUTION | ! |
RISK OF ELECTRIC SHOCK | |
DO NOT OPEN | |
AVIS: RISQUE DE CHOC | |
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE CENTER.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
RUNCO INTERNATIONAL
HAYWARD, CA
MADE IN USA
AC 120V 60Hz, 15W
12V TRIGGER
MADE IN USA
2 | 3 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
1.12v FUSE
This fuse protects the 12v outputs from the MASK and SCREEN jacks. (Screen Fuse: 5mm x 25mm, AGC, 0.5A, 250V, Fast Blow)
2.MASK
This is a 12V output that is used to trigger masking on screens that have that capability. (For use on motorized screens only, 1/4A maximum load).
3.SCREEN
This is a 12V output that is used to trigger the screen to drop. (For use on motorized screens only, 1/4A maximum load).
4.
This is for systems using serial
5.COMLINK OUT
The output of this jack must be connected to the ComLink input of the
6.RGB OUTPUT
This is the RGB Video output of the PFP Controller. Connect the RGB output of the Controller via a
7.HDTV/COMPUTER
This is the input for RGB or Component HDTV sources. Computer and Progressive DVD sources may also be input here.
8.COMPONENT INPUT
This is the input for Component Video from sources such as DVD players.
Note: The component output from a DTV decoder or a
9.S-VIDEO INPUT
This is the input for
10.COMPOSITE VIDEO INPUT
This is the input for Composite Video from sources such as laser disc players, VCRs and other misc. sources.
11.POWER INPUT
Plug in Main Power here.
12. 115 VAC FUSE | 13. MAIN POWER SWITCH |
This is the main AC Input fuse (.5A/250V). | Disconnects or applies main power to the Controller. |
8
