Runco DLC-2000HD user manual Remote Control Description, Power Button

Remote Control Description

A.IR OUTPUT INDICATOR

Illuminates when a button is pressed, indicating that an IR signal is being transmitted.

B.POWER BUTTON

Toggles the power on and off. For a discreet on or off command, you can use the direct access buttons (see 'J'). Note: When the main AC power switch is first turned ON, the Controller will go through an initiation cycle for approximately 15 seconds. The Controller cannot be turned on or operated until the initialization is complete.

C.UP BUTTON

When no menus are present on-screen, the UP button will toggle you through aspect ratios in the following order:

Standard (4:3) Letterbox Anamorphic

When the menu is on-screen, the UP button will move the cursor up within the menu. When an adjustment item has been selected (i.e. brightness), the UP button will increase the value of that function.

D.LEFT BUTTON

When no menus are present on-screen, the LEFT button will toggle you through the five different sources in the following order:

RGB HD Component HD Component S-Video Composite

E.DOWN BUTTON

When no menus are present on-screen, the DOWN button will toggle you through aspect ratios in the following order:

Anamorphic Letterbox Standard (4:3)

When the menu is on-screen, the DOWN button will move the cursor down within the menu. When an adjustment item has been selected (i.e. brightness), the DOWN button will decrease the value of that function.

C

D

I

E

OFF ON

A B

		PWR
I		I
N		N
P	M	P
U		U
T		T

1 2 3

4 5 6

7 8 9

0

RUNCO

G

F

H

J

F.RIGHT BUTTON

When no menus are present on-screen, the RIGHT button will toggle you through the five different sources in the following order:

Composite	S-Video	Component	Component HD	RGB HD J. DIRECT ACCESS BUTTONS
G. MENU BUTTON					These buttons will allow you to directly
					access an aspect ratio, source, or turn the
Pressing the MENU button will bring up the main menu. If no action is					unit on or off without having to go through
taken within approximately 10 seconds, the menu will time-out (disappear).					any menus. These buttons are:
Also, if you are in an adjustment mode or function, pressing MENU will
bring the menu back one level.					1: Selects COMPOSITE video
H. ENTER BUTTON					2: Selects S-video
					3: Selects COMPONENT video
When an item is highlighted on a menu, pressing ENTER will select that					4: Selects Component HD
item.					5: Selects RGB HD
I. PROGRAM BUTTON					6: Not used
					7: Selects the ANAMORPHIC aspect ratio
If the remote control loses its 'memory' as a result of weak or dead batter-					8: Selects the STANDARD (4:3) aspect ratio
ies, it must be re-programmed for the PFP Controller's code set.					9: Selects the LETTERBOX aspect ratio
To reprogram the remote, press the PROGRAM button followed by 0,1,3.					0: Turns the Controller ON.
Note: Pressing Enter after typing in the code is not necessary.					OFF: Also known as the button left of '0',

this turns the Controller OFF.

9