Toshiba RD-XS24SB owner manual 131, Recording Program, Remote control, Clock

Recording Program

Introduction

Cannot be recorded on a DVD-RAM disc.

•The disc is protected from deleting data.

→Set the write-protect tab to the opposite of “PROTECT” ( page 7).

•The disc is protected by a PC or the recorder.

→Disable the protection on the device which protected the disc.

•The disc space is not sufficient.

→Delete unwanted data ( page 42) or prepare a new disc.

•The disc is not initialized.

→Initialize the disc ( page 26).

•The disc may contain errors.

→Complete the physical format on the disc ( page 27).

•The physical format on the disc is not completed.

→Complete the physical format on the disc ( page 27).

•The disc has been recorded in the NTSC system. You can replay a title that has been recorded in the NTSC system, but you cannot display it in the thumbnail or use the edit or dubbing functions.

→You can use the recorder to initialize the disc to use it with this recorder, but the contents will be lost. If you do not want to initialize the disc, you can still play it, but no other functions are available.

Cannot be recorded on the HDD.

•The DVD mode is selected.

→Press the HDD button.

•The disc space of the HDD is not sufficient.

→Delete unwanted data ( page 42) or move the contents to DVD-RAM discs ( page 87).

•Some causes such as power failure may set the recorder to reject the operation to protect the HDD.

→Copy necessary contents recorded in the HDD to a DVD-RAM disc, and initialize the HDD.

Timer programming cannot be completed.

•Clock setting has not been completed.

→Complete the clock setting ( page 28, “INSTALLATION GUIDE”).

•The programs list is full.

→Cancel unwanted programs ( page 32).

Remote control

The remote control does not work.

•The batteries in the remote control are exhausted.

→Replace all the batteries in the remote control ( page 12, “INSTALLATION GUIDE”).

•The light emitter of the remote control is not pointed at the receptor of this recorder.

→Point the emitter of the remote control at the receptor of this recorder.

•The receptor of this recorder is located too far away from the remote control.

→Operate the remote control within 7 meters (23 ft) from the receptor of this recorder.

•There are obstacles between the remote control and this recorder.

→Remove any obstacles.

•The receptor is disturbed by sunlight or fluorescent light.

→Change the place of this recorder or shield the light.

•The remote control mode is not appropriate.

→Adjust the remote control mode of the remote control and this recorder ( page 40, “INSTALLATION GUIDE”).

Clock

The clock blinks.

→Complete the initial setting again ( page 24, “INSTALLATION GUIDE”).

The clock does not keep time.

→Set the time and date manually ( page 28, “INSTALLATION GUIDE”).

RecordingPlayback

Editing Function setup Others

131

RD-XS24SB_Ope_E_p127-137 131 9/1/05, 12:00 AM