Toshiba RD-XS24SB owner manual Playing all titles original/playlist in a disc

Resuming playback from the location last stopped (Title resume)

The recorder memorizes the location you last stopped playback to resume from there.

To use this function, set “HDD/RAM title play” ( page 121) to “Title resume.” The recorder will memorize the location you last stopped at in each title, so you can resume playback from there. For example, if there are 6 titles, you can start each of them as if you had stored 6 video tapes in the recorder.

•To return to the beginning of the title

During playback, press QUICK MENU button, then press / buttons to select “Restart title,” then press ENTER button.

•To play another title

Press the HDD or DVD button to display “CONTENT MENU Title List,” then select a title.

You can make the recorder memorize only the very last point, regardless of the number of titles. Set “HDD/RAM title play” ( page 121) to “Serial playback.”

•To return to the beginning of the title

Press SKIP REV () button repeatedly until the beginning of the title appears.

•To play the other title

Press SKIP REV () or SKIP FWD () button repeatedly.

Notes

•Depending on conditions or contents, playback may not start from the location last stopped at, but instead another location. For example, from the beginning of the disc or title.

•Depending on the disc, there may be a slight difference between the location the recorder memorized and the actual location where playback starts.

•This function is not available on DVD-R/RW discs.

•The resuming function will not work if the write-protect tab

is set to “PROTECT” ( page 7).

Notes

•The playback picture may appear after a delay of several seconds.

•While you are using this function, the following operations/ functions are not available.

-Programmed playback (repeat playback, etc.)

-Editing (Playlist programming, dubbing, title/chapter naming, etc.)

Playing all titles (original/playlist) in a disc

Set “HDD/RAM title play” ( page 121) to “Serial playback”. You can play all titles in the HDD and DVD- RAM disc in the order of the thumbnails on CONTENT MENU, as if they were recorded in one video tape.

Checking the background information on a selected title

1)At step 2 on page 46, select a title (chapter) then press QUICK MENU.

The Quick Menu appears.

2)Press / to select “Title information”, then press ENTER.

Detailed information of a selected title (chapter) appears. You can switch the chapters in the title by pressing the SLOW/REV () or FWD/SLOW () buttons.

Notes

•You can protect the title from unexpected erasure

( page 43).

•To return to the previous display, press the RETURN button.

Introduction RecordingPlayback

Editing Function setup Others

To play a recorded title while recording another on the same disc (Recorded Title Play)

During recording, you can play a title recorded on the same disc.

1)While recording, press HDD or DVD.

2)Press / / / to select a desired title, then press the ENTER.

Playback of the selected title starts.

Pressing the STOP button stops playback, and the content currently recorded returns. If you press the PLAY button, playback resumes from the location you last stopped.

49

RD-XS24SB_Ope_E_p049-059 49 8/31/05, 11:55 PM