Toshiba RD-XS24SB owner manual Others, To protect recorded content, Technical information

Recording

Others

To protect recorded content

You can protect recorded content from unexpected deletion.

Protection is provided for each title (original).

1)Perform steps 1 and 2 in “Playing recorded

contents (CONTENT MENU)” ( page 46) to select a title.

2)Press the QUICK MENU button, and press the / buttons to select “Title information”. Then press the ENTER button.

3)Press the QUICK MENU button, and press the / buttons to select “Lock” and then press the ENTER button.

The mark appears.

Notes

•To cancel protection, repeat this procedure at step 3), select “Unlock”.

•Disc initialization erases all titles on a disc even if they are protected.

•Executing “All HDD titles delete” ( page 124) erases all titles on the HDD even if they are protected.

Technical information

About recording time

The recording time of a typical VCR (Video Cassette Recorder) is determined by the length of a video tape and recording speed (SP, LP, etc.). Video tapes with various recording times are available in the market. On the other hand, the recording time of a DVD-RAM/ R/RW depends on the bit rate (Mbps: amount of data transmitted per second), which can be varied in MPEG2 (Moving Picture Experts Group2) compression technology.

As an example, when you pour water into a bucket from a faucet, the faster the water flows, the sooner the bucket is filled with water. On the other hand, the slower the water flows, the more slowly the bucket is filled. The DVD-RAM/R/RW is, so to speak, such a bucket, and the degree you turn the faucet is bit rate, the time required to fill the bucket with water is the recording time available for a disc. The higher you set the bit rate (making much more water flow), the sooner a disc is filled. Consequently, the recording time becomes shorter. The lower you set the bit rate, the longer time it takes to fill a disc.

However a high bit rate does not always mean that the picture quality is high. The difference between the 1.4 Mbps and 9.2 Mbps is obvious, but when comparing similar bit rates, the difference may be insignificant. Generally when you set the bit rate low for longer recording time, the data volume shortage will result in a lack of detail information. As a result, the picture quality is decreased (more noticeable with dynamically moving images). For example, square noises (block noise) may occur in a scene with fast action or a scene with light and shadows, such as a water surface.

This recorder has several settings, for example 2 hour recording at “SP” mode or 4 hour recording at “LP” mode (both assume a blank 4.7 GB DVD-RAM). It is recommended to consider the “XP” mode as a standard mode and use the “LP” mode when you want to record for long time regardless of the picture quality. If you want to record for about 2 hours or are uncertain which one to select, select the “AT” mode.

On a blank 4.7 GB DVD-RAM disc, the “AT” mode automatically sets the appropriate bit rate corresponded to the recording time from about 1 hour to up to 2 and a half hours so that you can achieve the best picture quality. If a part of a DVD-RAM disc has already been recorded, the “AT” mode sets the bit rate suitable for the remaining space on the disc. (The picture quality is determined referring the remaining space just before recording. When the remaining space is scarce in the disc, the picture quality may decrease from what you set beforehand or the recording may stop halfway.) “AT” mode is available also on DVD-R/RW recordings.

When you want to record a music program or animation with high picture quality, it is recommended that you select the “MN” mode. If you select more than 6 Mbps, you can usually record with considerably higher picture quality. However the higher you set the bit rate, the shorter the recording time.

D /M1, D /M2

Sound recording format onto DVD-RAM discs. When recording, sounds are converted into digital signals and compressed. In playback, they are extracted to

the original sound. The standard differenciates D /

M1 and D /M2 in data volume to use. D /M1

and D /M2 are applied the digital recording technology for consumer products of Dolby

Laboratories. Dolby Digital 192 kbps is set for D /

M1 and Dolby Digital 384 kbps for D /M2.

Introduction RecordingPlayback

Editing Function setup Others

About picture quality (XP, SP, LP, AT (Auto), MN	L-PCM (Linear PCM)
	Sound recording format, like Dolby Digital. However,
(Manual) mode)
	sounds are converted into digital signals and recorded
The higher you set the bit rate, the more the volume of	as they are without compression. This process
information for the picture. The lower the bit rate, the	requires more data than Dolby Digital.
less the volume of picture information.

43

RD-XS24SB_Ope_E_p042-048 43 8/31/05, 11:54 PM