Toshiba RD-XS24SB Shifting a time period of a recording Time Shift, Relief recording, Pwr Off

Recording

Programming a recording (REC MENU) (Continued)

Changing the default settings of recording quality

1)While REC MENU basic (e.g. step 4) is displayed, press QUICK MENU.

2)Press / to select “AV record quality”, then press ENTER.

3)Follow steps 1 to 3 ( page 122).

REC									10/23(Su)17:50
MENU Basic
	AV record quality
Ch		HDD rec			XP	9.2		D/M1			Audio
1		DVD	rec		SP	4.6		D/M	1 6		D/M1
Rec time –	h –– m/ HDD remaining (excluding above)									51h 24m
	Manual record set.
Rec folder	Rate	ROOT			9.2
Genre	AudioNoqualitygenre				D/M1
DVD mode	Total	recordingOn(l) time: approx.					61min.
	(with	4.7 GB unused)
Edit title name				Advanced		Cancel				Set timer

Shifting a time period of a recording (Time Shift)

If a prior TV programme extends beyond its scheduled time and into one that you programmed, you can shift the programmed start and end time of the recording.

Turning the power off automatically after completing a programmed recording

1)While executing a programmed recording, press QUICK MENU.

2)Press / to select “End time”, then press

ENTER.

3)Press / to select the recording end time and power condition after the recording finishes.

( / to shift the cursor.) End time:

Set the hour and minute.

Pwr Off:

On: Power will be on also after the recording.

Off: Power will turn off after the recording.

4) Press ENTER.

Notes

•The recording end time cannot be changed in the following cases;

–within 1 minute before the recording end time.

–advancing the recording end time.

–during recording in AT mode.

•Even if you extend the recording end time, the recording will stop when the HDD is filled up. Also at 9 hours from the start time the recording will stop.

13:0013:54

Time Shift

20 minutes extend

13:2014:14

1)Press MENU.

2)Press / to select “Timer recording”, then press ENTER.

3)Press / to select a timer programme you want to shift the time period.

4)Press EXTEND.

“Start” and “End” are ready to be input.

5)Press EXTEND repeatedly.

Each time you press the button, “Start” and “End” are shifted in 10 minutes intervals up to 60 minutes later.

6)Press ENTER.

7)Press to select.

“Set timer”, then press ENTER.

8)Press EXIT to exit.

Note

•After you shifted the time of a timer programme which will be repeatedly daily or weekly, you should restore the original start/end time for future recordings.

36

Relief recording

If you set a timer programme to a loaded DVD disc but the disc does not have remaining space to record the programme, the recorder records the whole programme to the HDD instead of the loaded disc.

To use this function, set “Relief recording” ( page 123) to “On”.

Notes

•This function works also when you start a recording on a loaded DVD disc by pressing the REC button and the remaining space of the disc is under 10 minutes. (The programme is not recorded on the disc.)

•This feature does not work when the HDD does not have remaining space to record the programme.

•If the recording end time is extended after starting a timer programmed recording, the programme is not recorded onto the HDD. The loaded disc records the programme until it is filled up then stops recording.

RD-XS24SB_Ope_E_p025-036 36 8/31/05, 11:52 PM