Notes

Time slip recording/playback stops when the disc is filled up. You can play up to a location where the recorder stopped the recording. The time slip recording/playback cannot begin if the disc is full.

The playback picture may appear after a delay of several seconds.

The playback location will never be identical to the record location in the programme. It will always trail the record location by a few seconds.

While using time slip recording/playback, you cannot program a recording.

While the TIMESLIP indicator is on, you cannot change the setting of the feature that turns off the recorder after a programmed operation has finished.

Even while “Auto power off” is selected, the recorder does not turn off if the recording end time comes during playback of a programme being recorded.

This function is not available on a DVD-RAM disc when “Relief recording” ( page 123) is set to “On.”

Playback may jump a few seconds back or pause depending on the disc or data condition.

Introduction RecordingPlayback

Editing Function setup Others

59

RD-XS24SB_Ope_E_p049-059

59

8/31/05, 11:55 PM

Page 59
Image 59
Toshiba RD-XS24SB owner manual Introduction RecordingPlayback Editing Function setup Others