Toshiba RD-XS24SB owner manual 105, Playing a created DVD-Video, Cancelling selection of an item

To delete a captured image

Press / / / to select an image to delete then press QUICK MENU. Press / to select “Delete Menu” then press ENTER. Follow the message to operate.

To delete all captured images, select “Delete all Menus”.

Cancelling selection of an item

1)Press / / / to select an item then press

QUICK MENU.

The Quick Menu appears.

e.g.
E D I T	DVD-Video Create (Selected Items)			HDD (VR)
MENU
	Quick Menu		Source: (VR)Title Original
HDD :
Cancel Selected Title
Title Information
Crear All Selected Items
		Exit
			Media:	DVD-R (V)
	001	002	003
Capacity				Next

2)Press / to select “Cancel Selected Title” (or “Clear All Selected Items” for cancelling selection of all items at a time).

3)Press ENTER.

The selected item disappears.

If a message appears while selecting a part

You may receive a message, such as “Selection of Writing Test in the next option setting is recommended to check whether Aspect Ratio coexists”. If a copy- prohibited content is included, or if the aspect ratio is changed meanwhile, cancel the selection. If you are not sure, select “Writing Test” (“Parts Test” or “All Test”).

Note

•Depending on selection or condition of items, copying may result in failure. If a message appears, be sure to, prior to step 8, press the QUICK MENU button. Then press the / buttons to select “Cancel selected title”, and press the ENTER button. If you do not do this and continue the copying process, an error may occur and the disc will be rendered useless.

Playing a created DVD-Video

You can play the DVD-R/RW (Video mode) in the same manner as you would play a DVD video disc.

See page 56.

If you want to correct the contents of a DVD-RW (Video mode) after the DVD-Video creation procedure

Cancel the finalization of the DVD-RW (Video mode) ( page 93).

It is possible only on DVD-RW (Video mode) recorded on this recorder.

After cancelling, you can delete titles. However, you cannot re-use the whole disc, since only the last title can restore the disc space.

If you want to delete all contents of a DVD-RW (Video mode) after the DVD-Video creation procedure

Load the DVD-RW into the recorder and initialize it, then execute the procedure of DVD-Video creation ( page 98).

Introduction RecordingPlayback

Editing Function setup Others

105

RD-XS24SB_Ope_E_p102-105 105 8/31/05, 11:58 PM