Toshiba RD-XS24SB owner manual 129, Entering characters

Entering characters

The cursor may be followed by unwanted characters. You can erase them if necessary by either of the following measures:

Erasing characters

• Erasing all the characters on the writing board

Select “Clear All” by pressing the	/	/	/ buttons,
then press the ENTER button.
Alternatively, press the CLEAR button.
• Erasing one character before the cursor
Select “BkSp” by pressing the /	/	/	buttons,
then press the ENTER button.

Alternatively, press the DELETE button.

(1)Press the button to select an input mode.

(2)Press the / / / buttons to select a character, then press the ENTER button.

The selected character is input on the cursor.

(3)Repeat steps (1) and (2) to enter characters.

(4)When finished, press the MODE button to save the characters.

The characters you entered appears.

Notes

•You can enter up to 64 characters.

•When unnecessary information appears, or when you want to alter the input character, press the CLEAR button to erase all, or press the DELETE button to erase an unnecessary character.

Introduction RecordingPlayback

Editing Function setup Others

129

RD-XS24SB_Ope_E_p127-137 129 9/1/05, 12:00 AM