Features and Benefits
The DR-300c system is a very unique system and has many important features, including:
• Full control of the Projector via the PFP Controller. This control includes all image quality
adjustments as well as Projector adjustments such as image configuration.
• 1000 ANSI lumens light output.
• Reliable lamp with 1000 hour life span.
•Native 1024 x 768, Widescreen 1024 X 576
• RGB/Component (via 15 pin connector) port for DTV or computer signals. RGB and
Component signals are automatically detected by the Projector for ease of operation.
• An adaptive two-dimensional comb filter that greatly reduces artifacts when using
Composite video.
• A Luma edge enhancement circuit makes the edges of objects appear sharper without the
ringing and noise associated with traditional sharpness circuits.
• A Chroma edge enhancement circuit is included to compensate for lower chroma resolution
found in composite and S-Video.
• Inverse telecine (3:2 pulldown) detection and processing allows the scaler to almost
completely eliminate interlace artifacts associated with other scalers.
• System can be configured for 4:3 screens, 16:9 screens or 16:9 screens with an anamor-
phic lens installed.
• Aspect ratio control for either 16:9 or 4:3 screens provides anamorphic, 4:3 and letterbox
ratios.
• ATime Base corrector circuit is provided for unstable sources such as VCRs.
• 12v outputs for drop screens and screen masking.
• Automatic switching between NTSC and PALsignals.
• Fully RS-232 controllable, with direct access to sources and aspect ratios.
• Asimple remote controls all aspects of operation, and includes discreet on/off, aspect ratio
and source selection commands.
8