The image appears too

 

· Brightness is set too high.

· Turn down the BRIGHTNESS

'washed out', or the darkest

 

· The DVD player may be set

level on the Controller. If possi-

areas of the image appear too

 

for too high of a brightness

ble, use a PLUGE pattern to set

bright.

 

level.

the brightness level properly.

 

 

 

· Set the DVD player for a nomi-

 

 

 

nal output (no boost or gain).

 

 

 

 

 

The colors of the image

 

· The Red, Green and/or Blue

· Check the cable connections

appear abnormal

 

outputs of the PFP Controller or

on the back of the PFP

 

 

inputs to the Projector are

Controller or on the Projector.

 

 

reversed.

 

 

 

 

· The Pr and Pb inputs on the

 

 

 

 

Component input on the PFP

 

 

 

 

Controller are reversed

 

 

 

 

 

 

 

The image appears keystoned

 

· The Projector has been

· Adjust Keystone, see page 22.

(trapezoidal).

 

mounted too high or too low in

 

 

 

 

respect to its vertical

 

 

 

 

offset.

 

 

 

 

 

 

 

The Projector will not turn on,

 

· The PFP Controller may have

· Unplug the Controller for 2

and the power LED on the

 

'locked-up'.

minutes; plug it back in a re-try.

front of the PFP Controller is

 

 

· Perform a system reset on the

blinking red.

 

 

Controller (see page 23), and

 

 

 

then re-try.

 

 

 

 

 

The Projector will not turn

 

· The Projector will not turn on

· Wait two minutes until the LED

back on after it was powered-

 

for two minutes after power-

on the front of the PFP

down, or the image disap-

 

down to protect its bulb.

Controller turns red.

pears during operation.

 

· The bulb has failed

· Check the error light in the

 

 

 

Projector.

 

 

 

 

 

The Projector tries to turn on

 

 

 

 

If this happens, the projector may have detected a fault. The red

but the lamp does not come

 

Status LED will blink in several different ways, describing different

 

on and the status LED on the

 

faults:

 

 

Projector is blinking.

 

 

 

 

 

 

On constantly: The bulb has exceeded 1000 hours.

 

 

 

Blinking on and off every second: The lamp cover is not on

 

 

 

properly. Contact your Runco dealer.

 

 

 

Blinking on and off every 4 seconds: The Projector has over-

 

 

 

heated. Ensure nothing is blocking the Projector's ventilation

 

 

 

holes.

 

 

 

 

Blinking on and off every 8 seconds: The fan has stopped.

 

 

 

Contact your Runco dealer.

 

 

 

 

Blinking on and off every 12 seconds: The lamp did not turn on.

 

 

 

If the Projector was turned on and off too quickly, this may hap-

 

 

 

pen. Allow the Projector to settle for 5 minutes, and try again. If

 

 

 

the same fault is reported, contact your Runco dealer.

 

 

 

 

 

 

 

 

 

 

 

26

Page 28
Image 28
Runco DR-300c manual Image appears too

DR-300c specifications

The Runco DR-300c is a high-performance projector renowned for its superior image quality and innovative technologies, making it a preferred choice for home theaters and professional installations alike. With an emphasis on enhancing the viewing experience, the DR-300c leverages cutting-edge advancements that position it at the forefront of projector technology.

One of the standout features of the Runco DR-300c is its use of advanced DLP (Digital Light Processing) technology. This results in stunningly sharp images with vibrant colors and deep blacks. The projector boasts an impressive native resolution of 1080p, delivering crystal-clear detail that brings cinematic visuals to life. The high contrast ratio further enhances the depth of images, providing an immersive viewing experience worthy of premium home theater setups.

The DR-300c is equipped with Runco's proprietary VueFilm technology, which optimizes color reproduction and image accuracy. This ensures that colors remain true to the creator's vision, making it an excellent choice for film enthusiasts and professionals who require precision in color grading. The onboard image processing capabilities also reduce motion blur, making the projector ideal for fast-paced action scenes in movies or sports.

Flexibility is another characteristic that sets the Runco DR-300c apart. It offers multiple connectivity options, including HDMI, component, and composite inputs, making it compatible with a wide range of devices, from gaming consoles to Blu-ray players. The inclusion of the Runco's proprietary Lens Memory feature allows users to easily switch between different aspect ratios, automatically adjusting the lens position to accommodate various formats without losing image quality.

In terms of design, the DR-300c is both sleek and functional. Its compact size allows for easy installation in various environments, whether in dedicated theater rooms or multi-purpose spaces. The projector's quiet operation also enhances the viewing experience, minimizing distractions during movie nights or presentations.

Overall, the Runco DR-300c stands out as a projector that combines exceptional image quality with advanced technology and user-friendly features. Its blend of superior color accuracy, flexible connectivity, and cutting-edge processing capabilities makes it an outstanding investment for anyone serious about elevating their visual experiences at home or in a professional setting. Whether you are a casual viewer or a discerning cinephile, the DR-300c promises to deliver visuals that captivate and inspire.