Runco DTV-873 manual Memory management, Copy a block, Memory Management, Copy a Block

Service Mode

Memory management

Highlight ‘Memory management’ by pushing the control disc up or down and press ENTER to display the memory management menu.

Within the memory management menu, the following items can be consolidated or executed :

-copy a block

-delete a block

-delete all blocks

-all settings to midposition

-R&B convergence to mid

-Gr convergence mid (only if green convergence is available)

SERVICE MODE

PROJECTOR SET-UP

MEMORY MANAGEMENT

COMMON SETTINGS

MEMORY MANAGEMENT

COPY A BLOCK

DELETE A BLOCK

DELETE ALL BLOCKS

ALL SETTINGS TO MIDPOS

R & B CONVERGENCE MID

GR CONVERGENCE MID

Select with or then <ENTER> <EXIT> to return.

Copy a block

The copy a block function copies the settings of a selected block into the active block.

Highlight copy a block with the control disc and press ENTER.

ENTER will select the highlighted item.

EXIT returns to the Path Selection main menu.

ADJUST returns to the Operational mode.

To copy the settings of a closed block to the block you are working on (active block), use the control disc to select a block.

All existing settings will be overwritten with the new settings.

Press ENTER to copy the selected block. A confirmation screen will be displayed.

ENTER displays a confirmation screen.

EXIT returns to the Service Mode main menu.

If you are certain you wish to copy the contents of the selected block into the active block, press ENTER.

EXIT cancels the copy procedure and returns without copying the block.

MEMORY MANAGEMENT

COPY A BLOCK

DELETE A BLOCK

DELETE ALL BLOCKS

ALL SETTINGS TO MIDPOS

		COPY MODE
Nr.	Src	Fh	Fv	inp	conf
1	1	15.6	50	video	FC
2	3	31.2	60	RGB3S RT
3	-	15.6	50	intern	FC
			COPY BLOCK
	All settings
	in current block
	will be overwritten !

Select with or then <ENTER> <EXIT> to return.

7-5