Runco DTV-873 manual Table of Contents

TABLE OF CONTENTS

RANDOM ACCESS ADJUSTMENT MODE	6-1
Starting up the Random Access Adjustment mode	6-1
Overview ‘Random Access Adjustment’ mode	6-1
Selecting Setup Pattern	6-2
Internal Cross Hatch Pattern	6-2
Random Access Adjustment Mode selection menu	6-3
Picture Tuning	6-3
Color Balance	6-3
Sync Fast/Slow Adjustment	6-3
Peaking	6-4
Color Select	6-4
Geometry Adjustments	6-5
Horizontal Phase Adjustment	6-5
Raster Shift Adjustment	6-6
Left-Right (eat-west) Adjustments	6-7
Top-Bottom (north-south) Adjustments	6-8
Size Adjustment	6-9
Vertical Linearity Adjustment	6-9
Blanking Adjustments	6-10
Convergence Adjustment	6-11

SERVICE MODE	7-1
Starting up the Service mode	7-1
Overview flowchart ‘Service’ mode	7-1
Projector Set-up	7-2
Identification	7-2
Total Run Time	7-3
Change Password	7-3
Change Language	7-3
Change Projector Address	7-4
Change Baudrate	7-4
Power up mode	7-5
Memory Management	7-5
Copy a block	7-6
Deletion of blocks	7-6
Deleting block by block	7-6
Deletion of all blocks	7-6
All settings to midposition	7-7
Undo all settings to midposition	7-7
R & B convergence mid	7-7
Undo R & B convergence mid	7-8
Green convergence mid	7-8
Undo green convergence mid	7-8
Common Settings	7-8
G2 Adjustment	7-9
CRT run in cycle	7-9
Projector warm-up	7-10
Memorybanks	7-10
I2C Diagnostics	7-11
MESSAGES, WARNINGS, AND FAILURES	8-1
APPENDIX 1 (RS 232 Control)	APP-1

i-2