Runco PL-61DHD DHD Controller Front Panel, Runco Icon, IR Sensor, Vacuum Fluorescent Display

Controls and Functions

2.2

DHD Controller Front Panel

Figure 2-3shows the controls and indicators on the DHD Controller front panel; the paragraphs that follow describe them.

1 2 3 4 5 6 7 8 9 10

Figure 2-3. DHD Controller Front Panel

1.RUNCO ICON

Lights red to indicate that the DHD Controller is in standby mode; lights blue to indicate that the unit is on.

2.POWER BUTTON

Press once to toggle from standby mode to on mode. Press it again to return to standby mode. For a discrete on or off command, you can use the direct access buttons on the remote control.

3.IR SENSOR

Receives IR commands from the remote.

4.VACUUM FLUORESCENT DISPLAY

Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu or – if no menu is selected – the current source, signal format (NTSC or PAL), input resolution and aspect ratio.

8 Runco PlasmaWall Owner’s Operating Manual