Runco PL-61DHD manual Quick Setup, Installation specialist, Step Procedure For Details, refer to

Installation

Table 3-1gives a quick overview of the PlasmaWall installation process. The sections following this one provide detailed instructions.

	Note		Installation should be performed by a qualified custom video
			installation specialist.
Table 3-1. Installation Overview
Step			Procedure	For Details, refer to
				page...
1		Mount the PlasmaWall on a wall or table stand		18
2		Connect the DHD Controller to the PlasmaWall		20
3		Connect signal sources to the DHD Controller		22
4		Connect external controller to DHD Controller RS-232 port		26
		(optional)
5		Apply power to the PlasmaWall		29
6		If using the PlasmaWall with a PC, adjust PC display prop-		30
		erties
7		Display calibration: adjust the following for each input,		34 through 40
		starting with Component SD; save settings when finished:
		• Aspect ratio
		• Brightness
		• Contrast
		• Color level
		• Tint
		• Sharpness

3.2

Quick Setup

Runco PlasmaWall Owner’s Operating Manual 17