Rear Panel
Pb Pr Y
Video
3
IR
RS-232 Control
S-Video 1
S-Video 2
HD1
HD2
12
Pr
R
Y
G
Pb
B
R
Pr
G
Y
B
Pb
HV
DVI 1 DVI 2DVI OutH/VVH
Pr
R
Y
G
Pb
B
HV
TRIGGERS
RS-232 Out
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN !
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
100-230VAC 50-60 Hz, 165 Watts Max
OUTPUTS
INPUTS SYSTEM CONTROL INTERFACE
Component Video
SDI
Option
Serial No
Video Processor / Controller
Model
Runco International
Union City, CA
Made In USA
2 3 4 7 108 14 15 16 17
11 13
1
65
129
OUTPUTS:
1. ANALOG OUTPUTS (BNC Connectors) (This output is not used when married to the VX-2c)
The various output lines used to drive the analog input of the display device. Individually, the jacks are: V=vertical
sync, H=horizontal sync, B=Blue, G=Green, R=Red. Connect these to the corresponding projector inputs.
2. DVI OUT
The DVI digital link used to drive the digital input of an HDCP compliant display device. Connect to the projector’s
DVI inputs.
INPUTS:
3. DVI 1 (Digital)
DVI input #1, HDCP compliant.
4. DVI 2 (Digital)
DVI input #2, HDCP compliant.
5. HD 1 (Analog BNC connectors)
High Denition input #1, accepts RGB(HV) or
YPrPb, 480p, 720p, 480i, 576i or 1080i.
6. HD 2 (Analog BNC connectors)
High Denition input #1, accepts RGB(HV) or
YPrPb, 480p, 720p, 480i, 576i or 1080i.
7. COMPONENT INPUT (RCA connectors)
Standard Denition (480i/576i) Component
(YPrPb) input. This is the input for component
video from sources such as DVD players. (Do not
set DVD player in progressive output mode).
8. COMPOSITE INPUT (RCA connector)
This is the input for Composite Video input from
sources such as Laser disc players, VCRs and other
miscellaneous video sources.
9. S-VIDEO 1 INPUT
This is the input for S-video #1 from sources such
as Satellite receivers, S-VHS VCR’s and DVD
players.
10. S-VIDEO 2 INPUT
This is the input for S-video #2 from sources such
as Satellite receivers, S-VHS VCR’s and DVD
players.
11. TRIGGERS 1/2/3 (Outputs)
Connection for 3 different 12V trigger controlled
devices.
12. RS-232 OUT (RJ-11 Connector)
To transmit control signals to the plasma display.
13. IR
Wired input from an external remote control.
14. RS-232 CONTROL
Connection for an external RS-232 controller
device to integrate the DHD with system automation
control.
15. POWER INPUT (100-230v)
Plug in main power here.
16. MAIN FUSE
This is the main AC input fuse. (Main Fuse:
5mm x 20mm, 500mA, 250V, Slow Blow)
17. MAIN POWER SWITCH
Disconnects or applies main power to the
processor.
12