Runco VHD-4402 manual Menu Description And Navigation, Main Menu

MENU DESCRIPTION AND NAVIGATION

Main Menu

MAIN MENU

> COMPOSITE		ADJUST
	S-VIDEO			Source selection and
	COMPONENT
				picture quality adjustments
	PASS THROUGH
	ASPECT RATIO
	DISPLAY CONTROL		Aspect ratio selection
			Sets parameters for
			the projector
			(Not Used In This Version)

The main menu (shown above) includes two sections: Source Selection/ Picture quality adjustments and Functional adjustments. Pressing MENU on the front panel or on the remote control will bring up the main menu.

In the menu shown above, Composite video is selected as the current source. This is indicated by an arrow to the left of ‘COMPOSITE’ in the menu. If S-video were selected, for example, the arrow would then be to the left of ‘S-video’.

To select a source, there are two options. First, using the main menu, you can highlight the desired source with the up or down arrows (front panel or remote), then press enter. The VHD-4402 ULTRA will immediately switch to the desired source. The second option is to simply press the LEFT or RIGHT buttons on the remote or front panel (see page 4) while there are no menus on screen.

Note:

There will be no on-screen display when the PASS-THROUGH is used. If you are using the PASS-THROUGH and wish to change sources, simply press the left or right buttons on the remote or front panel.

14