The amount of detergent you will put in your machine will depend on
the following criteria:
Your detergent utilization will be based on the amount of dirt or the
level of stains on your laundry. Do not prewash your less stained
laundry items and only put a slight amount of detergent in the 2nd
compartment of the detergent drawer.
For very dirty and stained laundry items, select a programme
including prewashing, and put ¼ of the normal amount of detergent
in the 1st compartment of the detergent drawer then put the
remaining ¾ of it into the 2nd compartment.
Use detergents produced for automatic washing machines in your
machine. The amount of detergent you should use for your laundry
is printed on the detergent package.
The higher the degree of hardness of the water the more detergent
you will use.
The amount of the detergent you will use will increase as the
amount of your laundry increases.
Put the softener in the softener compartment in the detergent
drawer. Do not exceed the MAX level. Otherwise, softener will flow
into the washing water when flushing through.
Softeners with a high density should be thinned to a degree before
being put in the drawer. This is because high-density softener will
clog the flush and avoid the flow of the softener.
You can use your liquid detergents in all programs without
prewashing. For this, fit liquid detergent level plate in the
accessories bag into 2nd compartment of the detergent drawer and
set the amount of liquid detergent according to the levels on this
plate. Remember to detach the liquid detergent plate.
14
SECTION-4: LAUNDRY PREPARATION